
|
Replacing the prop zinc on Mikhaya. |

|
|
When I hauled out in Nov-Dec 03, my prop zinc was gone (you only see the SS washer in the picture). I don't really know just how long a zinc will last cause I have made so many electrical changes on the boat that could effect it. |
|
|
The Outer nut had a locking cotter pin that was removed. After that the SS nut was unscrewed. |
|
|
The zinc was in place but not secured, just a form fit. I can't help but think how I would have done this underwater.
|
|
|
The new CAMP Zinc (P3P4) with the cotter pin space filled out. |
|
Related Web Pages on this site |
Also from a previous haul-out
see Prop & Shaft